Even Heat with Thermal Oil
An Oil-Heated Hot Press uses hot oil to warm up the platens. This oil goes through a heater that is separate from the press. An Oil-Heated Hot Press gives you very stable and even heat across the surface. The oil stays hot for a long time after you turn the heater off. You can use this press for wood types that need steady temperature. An Oil-Heated Hot Press does not need a high pressure boiler like steam systems. The oil lines are easy to install and move around the factory floor. Many plywood makers like oil heating because it is safe and reliable.
Safe and Simple System
The oil used in an Oil-Heated Hot Press stays inside a closed circuit. This closed system means no oil is lost during normal operation. An Oil-Heated Hot Press has a circulation pump that moves the oil around. The pump runs all the time to keep the temperature even. You can set the oil temperature with a simple thermostat control. An Oil-Heated Hot Press has a safety cut off that stops the heater if the oil gets too hot. The oil does not evaporate like steam or water. You only need to change the oil every few years. This press saves you money because the heater uses less energy.
Technical Data Sheet
|
Parameter |
Value |
|
Thermal Oil Type |
Mineral based (ISO VG 32) |
|
Heater Power |
150 kW |
|
Oil Flow Rate |
80 liters per minute |
|
Max Temperature |
220°C |
|
Oil Tank Capacity |
800 liters |
Hot Tags: oil-heated hot press, China oil-heated hot press manufacturers, suppliers, factory, Electric Hot Press for Plywood, Hot Hydraulic Press, hot press for plywood, Hydraulic Hot Press, Hydraulic Hot Press Machine for Plywood, Semi automatic Hot Press
