One Layer with Strong Force
A Single-Opening Hot Press works on only one wood panel at a time. This machine gives all its pressure to just that one layer. A Single-Opening Hot Press is perfect for making thick or special plywood. The press closes with huge force on one single panel. You get very even pressure across the whole surface of the wood. A Single-Opening Hot Press has a big platen that is thick and flat. Many factories use this press for making high quality plywood. The simple design means there are fewer parts that can break.
Easy to Use and Maintain
The controls on a Single-Opening Hot Press are simple and clear. You can set the time and temperature with a few buttons. A Single-Opening Hot Press has a hydraulic system that works very smoothly. The machine opens and closes without any jerky movements. You can load the panel from the front or the side. A Single-Opening Hot Press heats up with steam or thermal oil. The platen surface is ground to be very smooth and flat. This machine is easy to clean and keep in good condition. A Single-Opening Hot Press will give you years of reliable service.
Technical Data Sheet
|
Parameter |
Value |
|
Total Pressure |
1200 tons |
|
Platen Size |
2500mm x 1250mm |
|
Max Temperature |
210°C |
|
Heating Time |
45 minutes to 210°C |
|
Hydraulic Oil Tank Capacity |
300 liters |
Hot Tags: single-opening hot press, China single-opening hot press manufacturers, suppliers, factory, Electric Hot Press for Plywood, Hot Hydraulic Press, hot press for plywood, Hydraulic Hot Press, Hydraulic Press for Plywood, Semi automatic Hot Press
