The Mixer Head Goes Up and Down. No More Settling at the Bottom.
Fixed mixers have a problem. They only stir the top half of the glue. The glue at the bottom settles. It gets thick. It gets lumpy. This ruins your boards. Our Lifting-Type Glue Spreader fixes this. The mixer head moves up and down. It stirs from the very bottom to the very top. A plywood factory in Shanxi used this machine. Before, they had glue settling problems every month. They wasted hundreds of boards. After switching to our mixer, glue uniformity went up 40%. They have not had one glue failure since.

Stainless Steel Blades for Easy Cleaning
The mixing blades are stainless steel. Glue does not stick. Rust does not form. Cleaning is easy. The blades come off. You can wash them. The mixer head moves up and down on a立柱. The lift uses a hydraulic cylinder. It is smooth. No jerking. The motor is 7.5KW or 11KW. You choose the power you need. The speed is variable. Turn it down for thick glue. Turn it up for thin glue.

Fits Different Bucket Sizes
The Lifting-Type Glue Spreader works with different bucket sizes. The lift stroke is 1000mm. That covers most glue buckets. The machine comes with a 200 liter stainless steel bucket. You can use your own bucket if you want. The mixer has a digital control box. Start, stop, up, down, and speed are all on one panel. Here are the specs.

|
Parameter |
Value |
|
Lift Stroke |
1000mm |
|
Mixing Speed |
0 to 1440 r/min (variable) |
|
Bucket Size |
200L stainless steel (included) |
|
Lift Drive |
Hydraulic cylinder |
|
Motor Power |
7.5kW or 11kW |
|
Voltage |
380V/50Hz (other voltages available) |
|
Machine Weight |
About 1100kg |
We set up your mixer and train your workers. This machine makes sure your glue is mixed right from top to bottom. Choose us for glue you can trust.
Hot Tags: lifting-type glue spreader, China lifting-type glue spreader manufacturers, suppliers, factory











