A Simple Feeder for Hot Press Loading
Loading a hot press by hand is hard. The press is hot. The boards are heavy. Workers get tired. Our Semi-Automatic Board Feeding Frame makes it easier. You put the board on the frame. You press a button. The frame pushes the board into the press. No lifting. No reaching into the hot press. A small plywood factory used this feeder. Before, two workers loaded each board. It was slow and unsafe. Now one worker loads the boards onto the frame. The machine does the push. Loading speed went up 3 to 5 times.
Tray Design Protects Your Boards
The Semi-Automatic Board Feeding Frame uses a tray. The tray is smooth. The board slides without scratching. The tray has soft bumpers. The board stops gently. The pusher moves forward. It puts the board exactly where it needs to go. No crooked boards. No wasted boards. The machine works with boards from 5mm to 30mm thick. Board size is 4x8 feet. You can order custom sizes.
Simple Hydraulic Power
The pusher uses a hydraulic motor. It is strong. It does not stop. The speed is 0 to 300mm per second. You can adjust it. The frame is thick steel. It does not bend. The machine has an emergency stop. It has overload protection. The control panel is simple. One button to push. Here are the specs.
|
Parameter |
Value |
|
Board Size |
4x8 ft (custom sizes available) |
|
Board Thickness |
5 to 30mm |
|
Feed Speed |
0 to 300 mm/s |
|
Drive Type |
Hydraulic motor |
|
Motor Power |
1.5kW |
|
Control |
Push button |
We set up the feeder and train your workers. This machine is small. It fits in front of your hot press. Choose us for safer, faster hot press loading.
Hot Tags: semi-automatic board feeding frame, China semi-automatic board feeding frame manufacturers, suppliers, factory
